Hotpoint SX 1038LS P 0 X Instrucciones de uso descargar pdf (Pagina 9)

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

1. Press the icon and repeat steps 1 to 3 as described for the duration

setting.

2. Then press the icon and set the end time using the “ ” and “ ” icons.

3. Once you have reached the desired end time, press the icon again.

4. Press the button to activate the programmed mode.

The and icons will ash alternately to indicate that programming

has taken place; in the time before cooking starts, the TIME display will show

the duration and the cooking end time alternately.

5. Once cooking has nished, “END” appears on the TEMPERATURE display

and a buzzer sounds.

• For example: it is 9:00 a.m. and a time of 1 hour and 15 minutes is

programmed, while the end time is set to 12:30. The programme will

start automatically at 11:15 a.m.

To cancel programming press the icon.

Practical cooking advice

! Do not place racks in position 1 and 5 during fan-assisted cooking. This is

because excessive direct heat can burn temperature sensitive foods.

! In the GRILL and FAN GRILLING cooking modes, particularly when using

the rotisserie spit, place the dripping pan in position 1 to collect cooking

residues (fat and/or grease).

MULTILEVEL

• Use positions 2 and 4, placing the food which requires more heat on 2.

• Place the dripping pan on the bottom and the rack on top.

GRILL

• Place the rack in position 3 or 4. Position the food in the centre of the rack.

• We recommend that the temperature is set to its maximum level. The top

heating element is regulated by a thermostat and may not always operate

constantly.

PIZZA

• Use a lightweight aluminium pizza pan. Place it on the rack provided.

For a crispy crust, do not use the dripping pan as this extends the total

cooking duration and prevents the crust from forming.

• If the pizza has a lot of toppings, we recommend adding the mozzarella

cheese to the top of the pizza halfway through the cooking process.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Sin comentarios

Hotpoint SX 1038LS P 0 X Instrucciones de uso Pagina 9