Hotpoint OSX 896 D PX S Instrucciones de uso descargar pdf (Pagina 19)

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

Automatic cleaning with the FAST CLEAN

function

WiththeFASTCLEANmode,theinternaltemperatureofthe

oven reaches 500°C. The pyrolytic cycle is activated, burning

away food and grime residues. Dirt is literally incinerated.

Keep children away from the appliance during the automatic

cleaning cycle as surfaces may become very hot. Particles

may ignite inside the oven as a result of the combustion

process. There is no cause for concern: this process is both

normal and hazard-free.

BeforeinitiatingtheFASTCLEANmode:

• cleantheovendoor;

• removelargeorcoarsefoodresiduesfromtheinsideof

theovenusingadampsponge.Donotusedetergents;

• removeallaccessoriesandtheslidingrackkit(where

present);

• do not place tea towels or pot holders over the oven

handle.

! If the oven is too hot, the pyrolytic cycle may not start.

Wait for the oven to cool down.

! The programme may only be started once the oven door

has been closed.

!ThedesiredFastCleanmodewillbeconrmedandstarted

automatically if the CLOCK icon button is not pressed within

10 seconds from selecting the cooking time.

ToactivatetheFastCleanprogramme:

1. Switch the control panel on by pressing the button.

2. Press button ;thedisplaywillshowthetext“Piro”,

“nor” and the default duration of 1:30 h (normal cycle)

alternately.

3. Press button

,thenturntheTIMERknobtoadjustthe

default cleaning level. There are 3 different levels to choose

from,eachwithapre-setdurationwhichcannotbemodied:

1. Economy (ECO): turn the knob towards “ ”. Duration

1 hour.

2. Normal (NOR): initial level. Duration 1 hour and 30

minutes.

3. Intensive (INT): turn the knob towards “ ”.Duration2

hours.

4. Press the

buttontoconrm.

5. Press the button to begin the cleaning cycle.

AnendtimefortheFASTCLEANcycle(asforanormal

cooking cycle) may be programmed (see Programming the

automatic cleaning end time).

Safety devices

• thedoorlocksautomaticallyassoonasthetemperature

reaches a high value; the icon lights up on the

display;

• pressingthe button cancels the cleaning cycle at

anytime;

• if a malfunction occurs, the heating elements will be

switchedoff;

• oncetheovendoorhasbeenlocked,youcannotchange

the duration and end time settings.

Programming the automatic cleaning end time

1. Press the

button twice: the icon and the

numericaldigitsonthedisplaywillbegintoash.

2. Turn the TIMER knob towards “ ”and“ ”toadjustthe

cleaning end time value.

3. Once you have reached the desired end time, press the

button again. The display will show the duration, the

cleaning end time and the set cleaning level alternately.

4. Press the

button to activate the programmed mode.

Programming has been set when the and buttons

are illuminated.

5.Oncecleaninghasnished,“END”appearsonthedisplay

and a buzzer sounds.

• For example: itis9:00a.m. and the Economy (ECO)

FASTCLEANlevelhasbeenselected,withthedefault

duration of 1 hour. 12:30 is scheduled as the end time.

The programme will start automatically at 11:30 a.m.

To cancel programming press the

button.

Once the automatic cleaning cycle is over

Before you can open the oven door, you will have to wait

for the

icon to switch off: this indicates the oven

temperature has dropped to an acceptable level. You will

notice some white dust deposits on the bottom and the sides

ofyouroven;removethesedepositswithadampsponge

once the oven has cooled down completely. Alternatively,

you can make use of the already heated oven, in which

case it is not necessary to remove the deposits, they are

completely harmless and will not affect your food in any way.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Comentarios a estos manuales

Sin comentarios

Hotpoint OSX 896 D PX S Instrucciones de uso Pagina 19

Comentarios a estos manuales

Relacionado con productos y manuales para No Hotpoint OSX 896 D PX S