Hotpoint AKG 644/02 IX Instrucciones de uso descargar pdf (Pagina 3)

INSTALLATION

ELECTRICAL CONNECTION

Place of installation

If the gas appliance is to function properly the air required for the gas

combustion must flow into the room naturally (see Product Description

Sheet).

The installer must follow the binding safety rules in the country of

installation.

The flow of air into the room must come directly through openings

made in the exterior walls.

These openings must have a free passage section of at least 100 cm

(one or more openings may be made).

The combustion products must be extracted through extractor hoods

connected either to flues or direct external openings.

If an extractor hood cannot be installed, an electric ventilation fan must

be installed on the room’s outside wall or window, provided there is an

opening for air to enter the room, in conformity with binding

regulations.

This electric ventilation fan must have a flow capacity sufficient to

guarantee that 3 to 5 times the volume of air in the room is exchanged

every hour.

• Attention: Do not switch the oven on before you have finished

making the connection.

• Make sure that the installation and electrical connection are

done by a qualified technician in accordance with the

manufacturer’s instructions and in compliance with binding

local regulations.

• The installer is responsible for making the connection

correctly and observing the safety regulations.

• The oven must be connected to the electricity supply by

means of an all-pole disconnect switch with minimum contact

gap of 3 mm.

• Grounding of the appliance is compulsory by law.

• Do not use multiple plug adapters or extension leads.

• After the oven has been installed, the electrical components

must be inaccessible.

• Make sure that the voltage stated on the appliance rating

plate is the same as the voltage in your home. The rating plate

is on one of the sides of the cavity (visible with door open).

• Any replacement power supply cable must have the same

characteristics as the one supplied by the manufacturer (type

H05 RR-F) and must be fitted by either the After Sales

Service or a qualified technician.

Earth

(yellow/green)

1 2 3 4 5 6 7 8 9 10 11

Comentarios a estos manuales

Sin comentarios

Hotpoint AKG 644/02 IX Instrucciones de uso Pagina 3

Comentarios a estos manuales

Relacionado con productos y manuales para No Hotpoint AKG 644/02 IX