Hotpoint TVM 70C 6P/Z (EX) Instrucciones de uso Pagina 7

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 10
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 6
7
GB
Filter
Description
of the tumble dryer
Control panel
The timer knob
This is used to set the drying time: turn the knob in a clockwise direction until the indicator is set to the desired drying time (see
Start and Programmes). Do not attempt to turn the knob anticlockwise.
The Heat button
It can be used to customise the selected programme in accordance with your own requirements.
START button
Press the button to begin drying.
Control panel
Serial number
and model
number
Rating Plate
Front side Rear side
Drum
Caution, high
temperature
Air inlet
Connection for
ventilation hose
20
30
40
50
60
70
80
100
110
120
130
0
TIMER
Knob
Indicator
HEAT
Button
START
Button
Start and Programmes
Choosing a Programme
1. Plug the dryer into the electrical socket.
2. Sort your laundry according to fabric type (see Laundry).
3. Open the door and make sure the filter is clean and in place (see Care and maintenance).
4. Load the machine and make sure that the items are not in the way of the door seal. Close the door.
5. Choose the drying time by checking the Drying Guide table for the type of fabric you are drying (see Laundry).
- Set the temperatur
e with the HEAT button..
- Select a drying time by rotating the TIMER knob clockwise.
6. Press the START button to begin.During the drying programme, you can check on your laundry and take out
the items that are dry while the others continue drying. When you close the door again, press START in order to
resume drying.
7. During the last few minutes of Drying Programmes before the programme is completed, the final COOL TUMBLE
phase is entered (fabrics are cooled), this phase should always be allowed to complete.
8. Open the door, take the laundry out, clean the filter and replace it (see Care and maintenance).
9. Unplug the dryer.
Vista de pagina 6
1 2 3 4 5 6 7 8 9 10

Comentarios a estos manuales

Sin comentarios