Hotpoint ACO 654 NE Guía de uso y cuidado descargar pdf (Pagina 7)

Use & Care guide

FUNCTIONS

Please note: In the cooking zones close to the control panel, it is advisable to

keep pots and pans inside the markings (taking both the bottom of the pan

and the upper edge into consideration, as this tends to be larger).

This prevents excessive overheating of the touchpad. When grilling or

frying, please use the rear cooking zones wherever possible.

ACTIVATING/DEACTIVATING COOKING ZONES AND ADJUSTING

POWER LEVELS

To switch on a cooking zone:

1. Switch on the hob.

2. Set the required power level by sliding your nger across the slider

control (SLIDER) for the cooking zone of choice.

The power level will appear above the slider. Each cooking zone has

dierent power levels, ranging from “1” (minimum) to “18” (maximum).

Using the slider controls it is also possible to select the quick heat

function, which is marked “P” on the display.

To switch o the cooking zones:

Use the “OFF” control at the start of the slider control. If the cooking

zone is still hot, the residual heat indicator “H” will appear on the display.

CONTROL PANEL LOCK

To prevent the hob from being switched on accidentally, press and

hold down the OK/Control Lock-3sec control for 3 seconds. An acoustic

signal and a light above the symbol will switch on to indicate that the

lock is in place.

The control panel is locked except for the switch o function.

To switch o the control lock, repeat the activation process. The light

will switch o and the hob controls are again active.

TIMER

The timer can be used to set a maximum cooking time of 99 minutes.

The timer setting can be used on each cooking zone, following the same

procedure. The timer always shows the time set for the selected area, or

the shortest remaining time.

To start the timer:

1. Switch on the required cooking zone by pressing any part of the

slider.

2. Press the

control to set the required time. The display will

read “00”.

When the set time is up, an acoustic signal will sound and the cooking

zone will switch o automatically.

To change the timer setting:

1. Press the slider control for the cooking zone.

2. Press the

control to change the required time.

To switch o the timer:

Press the

and

controls together until the timer switches o.

FLEXIBLE AREA

Select the “Flexible Area” control to control two cooking zones at the

same time. It is possible to use both slider controls at the same time to

control the power.

Using this function is ideal to increase the cooking zone with the

advantage of positioning cookware as needed within the selected area.

Ideal for using oval or rectangular pans or grill pans.

VERTICAL FLEXIBLE ZONE

This can be used to control the two cooking zones on the left, at the

same time.

To switch on the Flexible area function:

1. Switch on the hob.

2. Press the control for the Vertical Flexible zone . Both areas will be

connected and the displays will read “0”.

3. Using the slider, select the power level you require.

To switch o the Flexible area function:

Press the control for the Flexibile area that is functioning: the cooking

zones will go back to operating individually.

The Flexible area function will also switch o when the hob switches o

at the end of cooking.

For the best results, always cover at least one or more points marked on

the glass surface or inside the Flexible area.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comentarios a estos manuales

Sin comentarios

Hotpoint ACO 654 NE Guía de uso y cuidado Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Hotpoint ACO 654 NE