Hotpoint FFA52S Instrucciones de uso Pagina 4

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 12
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 3
4
GB
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24
DOOR REVERSAL
Warning: Before attempting to remove the doors, switch off the electrical supply and pull out the mains plug.
It is recommended that you remove any loose items/fittings from inside the appliance and place food into insulated
containers whilst carrying out this operation.
You may require assistance to carefully lay the appliance onto its back onto suitable protective materials (i.e.
original packaging).
Remove the doors
1. Lay down the appliance on its back.
2. Unscrew, remove
and retain the bottom
hinge.
3. Slightly open the
bottom door and slide
downward remove
and carefully place to
one side
4. Remove centre
hinge and spacer if
fitted. Slightly open
the top door and slide
downwards, remove
and carefully place to
one side.
5.“The pin will be
removed and fixed to
the opposite side.
6. Use a thin blunt
instrument to remove
the top and bottom hinge bushes and blanking plugs from the doors, take care not to mark the door handle.
Reposition the blanking plugs and bushes on the opposite side.
7. Fit the blanking plugs provided into the right hand two centre hinge holes.
Replacing the doors
1. Slide the top door upwards and locate the top hinge pin into the door bush. Reposition the centre hinge on the
opposite side.
2. Carefully slide bottom door upward
into the centre hinge pin.
3. Unscrew the bottom hinge pin and
refit it on the opposite side..
4. Fit the bottom hinge making sure
that the door is aligned to the cabinet.
5. Carefully stand the appliance
upright in it’s required location and
make sure it is sitting level on the
floor. Open and close the doors
checking that the gasket makes a
good seal without any gaps when the
doors are closed.
Note: Replace loose items/fittings
back into the appliance and leave for
at least 15 minutes before switching
back on.
2
3
1
Vista de pagina 3
1 2 3 4 5 6 7 8 9 10 11 12

Comentarios a estos manuales

Sin comentarios